Double Hung Windows- Thermalwindowsdfw

Convenience

On our Double Hung Windows both the upper and lower sash slide up and down. Additionally, both upper and lower sashes will fold in to allow cleaning from the inside of your home. Our Double Hung Windows come standard with full screens.
We manufacture Double Hungs in:

• High Perfomance Vinyl
• Hybrid Aluminum (Thermally Broken)
• Wood-Vinyl
• FiberGlass

All frame systems available with a wide variety of glass packages to meet your design and energy requirements.

Efficiency

Hybrid Aluminum windows have a built-in structural barrier that dramatically reduces the transfer of heat and cold. Our Vinyl and FiberGlass window frames are natural insulators. All four of our window systems have deep pile fin-seal weather-stripping and are fully interlocking to reduce wind and water infiltration. Our insulated glass is engineered to provide  efficiency and energy conservation using SuperSpacer, SoftCoat LowE and Argon plus it’s backed by a limited lifetime warranty. (see actual warranty for details)

Colors

Vinyl Windows standard colors: White, Crème-White and Tan.

Hybrid Aluminum Windows standard colors: White, Bronze, Crème, Almond, and Sandstone; plus 9 Tier 2 colors. (Optional Tier 2 Colors: Black, Dark Gray, Light Gray, Medium Bronze, Rust Red, Bone White, Light Green, Dark Green and Medium Blue.)

Wood-Vinyl Windows standard exterior colors: White, Beige, Sandstone and Classic Bronze. 

Wood-Vinyl Windows standard interior stain finishes (categories): Oak Wood, Cherry Wood, and Maple Wood. 

FiberGlass Windows standard colors: Commercial Brown, Rainware White, Slate, Brown Stone & Almond.

Plus all of our windows are available in custom colors. Additionally, the Vinyl and Fiberglass window systems can be Duo-Tone (one color inside another outside).

Optional Features:

• Divided Lites (muntin bars)
• Triple Paned Glazing
• Laminated – Safety Glass
• Tinted Glass
• 1″ Contoured Divided Lites
• Solar Screens
• Night Latches
• STDL – simulated tru divided lite

Hybrid Aluminum , Vinyl & FiberGlass Windows for New Construction & Replacement

Contact us today at (214) 630-5885 or (817) 731-8886 to learn more about our double hung windows or click here for our online form.

Efficiency and Convenience of Casement and Awning Windows

Thermal Windows is based in Dallas and Fort Worth serving the entire DFW metro manufacturing and installing new windows since 1991.

How Awning and Casement windows are convenient for you?

Unlike older windows from the 50’s, casement and awning windows operate smoother and offer the benefit of multiple locking systems. If you are looking for windows with that classic  mid-century look, we can manufacture any custom design. We can re-create the exact replacement windows and upgrade them with modern features. Even if you need windows that reach all the way to your ceiling, we can install electric operators in them to make your too high to reach windows easily cleaned and maintained.

Varieties of casement and awning windows we manufacture and install are:

·         Thermally broken hybrid aluminum

·         Wood vinyl and high performance vinyl

·         FiberGlass

We have a wide range of glass packages which can exceed your expectations in matching your design and energy requirements.

Efficiency

1.       Built-in structural barrier to reduce leakage of heat and cold.

2.       Vinyl and FiberGlass windows are excellent insulators.

3.       All installed windows have fin-seal weather-stripping included.

4.       Interlocking system reduces the water and air infiltration.

5.       All windows are custom fit with a limited lifetime warranty.

If you'd like to give your home a new, energy efficient make over, please contact Thermal Windows today. You can call 214-630-5885 or fill out our online form to get a free estimate. Please visit http://www.thermalwindowsdfw.com to learn about the different types of windows and doors available from Thermal Windows.

What Are Some of the Significant Benefits of Sliding Windows from J & M Glass Company?

J&M manufactures windows and doors with the highest quality materials available in the market. This means you can expect exceptional durability for a much longer period of time. We are located both in Dallas and Fort Worth and have been providing professional window manufacturing and installation services to customers across the DFW Metroplex since 1991.

Sliding Windows to Fit Your Home

We manufacture and install sliding windows in both standard and custom designs to perfectly fit any existing window space. We have many styles, features and materials to choose from such as – Single and double sliders, Centre sliders and Picture sliders.

Our Sliding Windows are available in:

1. Vinyl
2. Wood and vinyl
3. Thermally broken hybrid aluminium
4. FiberGlass

No matter which style or design you choose, we have a wide range of glass packages to meet your energy requirements while offering a large selection of the most popular features.

We offer a wide range of colors as well. You can choose standard colors or go for custom colors to match your interiors and exteriors.

When considering upgrading your home with easy to maintain and energy efficient new or replacement windows, consider the quality, durability and attractiveness your windows should provide. Also consider the professionalism and commitment to quality in the installation process. There is a good reason people across the DFW metro have chosen J & M Glass Company for the last 26 years, we manufacture first class quality  windows and doors manufactured locally and installed by our own technicians.  

Please visit http://www.thermalwindowsdfw.com to learn about the different types of windows and doors manufactured. You can call us at (214) 630-5885 or (817) 731-8886.

How to Get Rid of Foggy Windows

Most home owners deal with the problem of foggy windows from time to time, especially  in the summer season.  Foggy windows are caused due to water that has become trapped between the panes of your window due to some kind of leak or weakness in the window. As the temperature increases this water turns to a vapor.

.

Foggy windows can drastically change the look and appeal of any room? No one likes the dingy look from foggy windows. It can make the home seem old an worn out but getting rid of the fog on the inside of the window is a challenge. You can scrub and clean all you like with no results. The fact is you are applying all that elbow grease to the exterior of the windows when the problem is in the interior because the fog has formed in between the panes of your multi layered window and it is simply impossible to clean it from the outside.

So, how does the fog got inside? The truth is your window is defective. It could be due to age or just poor quality materials or installation. During the winter or even just a little rain, the water gets trapped between the panes of your windows because of a failure in the integrity of the windows seals. That water eventually gets vaporized with the a little increase in heat, leaving you with a foggy window. It doesn’t matter if it is areplacement window or a brand new window, if it is getting for, it’s because of a leak allowing the water vapor to form between the panes and of course, that will blur your view through the window.

How repair the foggy window?

We can suggest the following things to repair your foggy windows.

Defog your window

Call windows defoggers to drill a small hole in the window. They will fill the cleaning liquid inside the hole and allow it to dry. After drying they install air vents in the window which allows the fog to evaporate when it form again in future.  

Window sash replacement

You can replace your old window sash if you have a removable one. Retaining the framework, you can replace the sash eliminating any weakness or leak. Before taking this route, make sure your window frames are in good working condition.

Replacement window

The ultimate solution and the only real fix, is a replacement window. With professional installation, you will have a brand new window.

Contact a trusted, local replacement window provider such as Thermal Windows to get your new window today.

Thermal Windows – J & M Glass Company offers top class replacement windows for new construction as well as for home renovation. Call (214) 630-5885 or visit http://www.thermalwindowsdfw.com/for more details

FiberGlass Patio Doors

EXTRAORDINARY SLIDING WINDOW WALLS!
It only makes sense that our fine tuned skills are most obvious in defined applications. This amazing selection of “sliding window walls” was designed by engineers with extensive experience and love for designing sliding doors. Combine this dedication with superb material and you will experience fabulous views combined with the inventive weatherseal systems and superb ease of operation.

Finely crafted sliding doors feature “built-in” details with all of the desired performance advantages. The sliding door is designed to nestle into the frame such that it creates a superior, rigid weatherseal while the “van style” door provides a superior compression seal.

The plutruded fiberglass frame and design allow exceptional products to be created including 8 foot tall biparting doors with 16 foot width, for over 7 feet of venting area (ask about oversize custom sizes also). Add sidelites or transoms above to create walls filled with luminance and ventilation.

Contact us today at (214) 630-5885 or (817) 731-8886 to learn more about our Patio Doors or click here for our online form.

North Dallas Ranch Style Sparkle

This beautiful 1955 ranch style home, located in North Dallas, still had the original mill finish aluminum windows. John, one of our Design Consultants, along with our customer, decided the Vinyl Triple Pane Windows, would work best for this home.  In the front of the home, Thermal Windows came in and updated the 6-piece window bow to a beautiful 3-piece window bow unit. We also converted a unit of 3 Single Hung Windows to a 3 Slider Window combination. This North Dallas home is sparkling by updating the look of the windows and giving the client a more energy efficient, quieter home to enjoy.

What is the right window for your home?

When making this decision there are usually several criteria’s that make a window right for your home and you. Thermal Windows Design Consultants can help provide you the right look, functionality & efficiency to meet your window replacement needs. With the choice of four frames — Vinyl, Hybrid Aluminum, Fiberglass and Vinyl/Wood added to a myriad of glass packages, we can help make your home more beautiful, more energy efficient, quieter and more valuable all at an affordable price.

Hybrid Aluminum, Vinyl & FiberGlass Windows for New Construction & Replacement

Contact us today at (214) 630-5885 or (817) 731-8886 to learn more about our variety of options to suit your design needs.

West Forth Worth Beauty

One of the 1990’s home, located in West Forth Worth, still had the original Clear Bronze Aluminum Windows.  Our customer met with our Design Consultant John, and decided the Tan Vinyl with Divided Lites Windows would be the way to update the look and efficiency of their home. 

What is the right window for your home?

When making this decision there are usually several criteria’s that make a window right for your home and you. Thermal Windows Design Consultants can help provide you the right look, functionality & efficiency to meet your window replacement needs. With the choice of four frames — Vinyl, Hybrid Aluminum, Fiberglass and Vinyl/Wood added to a myriad of glass packages, we can help make your home more beautiful, more energy efficient, quieter and more valuable all at an affordable price.

So whenever you wish to get new windows for your home or business, please contact Thermal Windows. The company is located in Dallas and has its own full time installation department. Call (214) 630-5885 for free estimates or visit http://www.thermalwindowsdfw.com/ for any further details.