Save Big on Dallas Aluminum Windows – Thermal Windows DFW

What is a Thermalized Aluminum Window?

The window frame and sashes are insulated; this is done by separating the outside aluminum extrusion from the inside extrusion with a material such as polyurethane, reducing the amount of heat or cold transferred through the frames. This feature is known as a thermal break or thermal barrier.

Do Thermalized Windows prevent condensation?

No window is condensation-proof. Even walls will “sweat” under high humidity. Windows do not cause condensation; they simply prevent moisture from escaping and provide a surface that allows condensation to be readily seen. If inside glass and frame surfaces on Thermalized window show excessive moisture, you can be sure that moisture is also present in your walls and ceiling.

Factory Installation

Our installation team has well trained and highly qualified professionals with the expertise to install the window systems into any opening properly the first time with no excuses. We can handle the design, manufacture and installation all from our Dallas facility making sure the manufacture and fitting of your windows are right, and we even  back up our work with one of the toughest warranties in our business!


Contact Address:
 Dallas Showroom & Manufacturing Plant, J & M Glass Company,  Inc.,
 8808 Empress Row, Dallas TX 75247
 Call Us: (214) 630-5885
 Please Visit http://www.thermalwindowsdfw.com

Thermalized Aluminum Windows from J & M Glass Company is a Smart Choice

All thermal aluminum windows manufactured by J&M Glass pass very strict industry specifications. That alone makes them a good choice, but there’s more. According to one of the specifications, air leakage cannot increase more than 0.375 cubic feet per minute (CFM) for each foot of weather-stripped window boundary with a 25 MPH wind raging outside. Our 700 Series Double Hung permits only 0.06 CFM air percolation and that is only one sixth of the industry standard specifications!

A Thermal Aluminum Window has minimal air leakage when compared to other non-thermal break windows. They have greater resistance towards heat transmission too.  With double glazing, they will break 26% to 38% of the heat loss when compared to wood windows manufactured at most factories.

The Thermal barrier aluminum frames are heat tested by bringing the fresh aluminum up to a T5 temper to provide both strength and durability.  That greatly minimizes the amount of heat or cold transmitted through the frames. That saves you money!

 

Factory Installation

Our installation team has well trained and highly qualified professionals with the expertise to install the window systems into any opening properly the first time with no excuses. We can handle the design, manufacture and installation all from our Dallas facility making sure the manufacture and fitting of your windows are right, and we even  back up our work with one of the toughest warranties in our business!

Contact Address:
 Dallas Showroom & Manufacturing Plant, J & M Glass Company,  Inc.,
 8808 Empress Row, Dallas TX 75247
 Call Us: (214) 630-5885
 Please Visit http://www.thermalwindowsdfw.com

Thermalized Aluminum Windows from J & M Glass Company is a Smart Choice

All thermal aluminum windows manufactured by J&M Glass pass very strict industry specifications. That alone makes them a good choice, but there’s more. According to one of the specifications, air leakage cannot increase more than 0.375 cubic feet per minute (CFM) for each foot of weather-stripped window boundary with a 25 MPH wind raging outside. Our 700 Series Double Hung permits only 0.06 CFM air percolation and that is only one sixth of the industry standard specifications!

 A Thermal Aluminum Window has minimal air leakage when compared to other non-thermal break windows. They have greater resistance towards heat transmission too.  With double glazing, they will break 26% to 38% of the heat loss when compared to wood windows manufactured at most factories.
The Thermal barrier aluminum frames are heat tested by bringing the fresh aluminum up to a T5 temper to provide both strength and durability.  That greatly minimizes the amount of heat or cold transmitted through the frames. That saves you money!
Our installation team has well trained and highly qualified professionals with the expertise to install the window systems into any opening properly the first time with no excuses. We can handle the design, manufacture and installation all from our Dallas facility making sure the manufacture and fitting of your windows are right,  and we even  back up our work with one of the toughest warranties in our business!
Contact Address:
Dallas Showroom & Manufacturing Plant, J & M Glass Company,  Inc.,
8808 Empress Row, Dallas TX 75247
Call Us: (214) 630-5885
Please Visit http://www.thermalwindowsdfw.comfor further details.